Replacement pannier to frame lock for all Hepco and Becker panniers. This is the lock at the rear of the panniers that secures it to the pannier frame plate

Supplied with key, barrel, lock plate, rivets and fitting instructions. Includes pannier frame plate LUA70114

 1 in stock

Replacement top box to rear luggage rack lock for Hepco and Becker Junior top boxes / top cases. This is the lock at the base of the top box which attaches it to the luggage rack

Supplied with key, rivets, lock plate and fitting instructions

 1 in stock

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

Smarten up the rear of your V7 with this fenda eliminator kit with includes an LED tail light.

This tail tidy is part of the exciting range of MAS parts to make your V7 stand out from the crowd. Please note that these items are custom made in Italy and normally available to special order with a delivery time of approximately 6 weeks

 1 in stock

Performance air filter from Pipercross for mk 1 V7 models. 30% more airflow than a standard filter, supplied pre-oiled and ready for lifetime use on your bike. A great way to improve performance on your modern V7 mk 1

 1 in stock

AP8104242

Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.

Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included

 1 in stock

Black right hand knee protector, mounts to head and includes rubber pad and washers

See FRA18941 for replacement rubbers for this knee guard

 1 in stock

Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in polished finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers

Release the music in your Guzzi!
See this video to hear this silencer

 1 in stock

Pair of black alloy bar end extensions to enable fitment of Clubman mirrors to V7 and V9 models with threaded handlebar ends without needing to move switchgear inboard. Mirrors can be fitted without these but the handlebars need drilling for the switchgear locating pegs

 1 in stock

Performance 2-1 connecting pipe, de-CAT or H pipe. This mid pipe is 2kg lighter than the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA85433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrich the mixture

• Y piece made from AISI304 stainless steel
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• This crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust bushes
• Modern satin finish
• Manufactured on the shores of Lake Como and developed using a rolling road

 1 in stock